
Yes, Monash Biotech offers micropipettes without a spike in 30° and 35° angled configurations with a bevel length of 11 μm and an inner diameter (I.D.) of 05 μm.
Yes—if the tip penetrates too deeply or contacts the spindle region directly. Prevention: Limit penetration depth to just past the zona and use spindle‐safe imaging (polarized light) when available.
Whether you prefer spiked or non-spiked tips, our Injection Micropipettes have you covered.
Our Injection Micropipettes offer versatility with two bevel length options: 11µm and 10µm. Choose the best option for your specific needs and preferences.
To get a personalized quote for ICSI injections, please contact our sales team directly. We will be happy to provide you with a detailed estimate based on your specific needs and requirements.
Stable Suction: Apply just enough negative pressure to grip the zona—avoid over-suction that deforms the oocyte. Symmetric Hold: Center the pipette on the oocyte’s widest plane, not off to one side. Oil Overlay: A thin oil layer damps fluid currents that can spin the oocyte when pipettes move.
Denudation: Remove cumulus–corona cells gently to visualize the oocyte. Polar Body Check: Confirm presence of the first polar body (MII stage). Spindle Imaging (optional): Use polarized-light microscopy to verify spindle integrity in high-value cases.
Critical Window: Oocytes are highly temperature-sensitive at 36.8–37.2 °C. Effects of Drift: Even a ±0.5 °C deviation can alter membrane fluidity and spindle stability, reducing fertilization success. Mitigation: Use a heated stage or enclosed incubation chamber to maintain constant temperature throughout the procedure.
Too Fast: High shear stress causes membrane tearing and spindle disruption. Too Slow: Prolonged contact increases oocyte exposure outside the incubator, elevating ROS risk. Ideal: A consistent moderate speed—penetrate the zona in ~1 s, then advance into the cytoplasm in 0.5–1
Thicker Zona (e.g., post-vitrification or in older oocytes) requires higher injection pressure or a slightly wider tip. Hardening (spontaneous or induced) can be mitigated by pre-treatment with calcium-free medium or brief acid-Tyrode exposure.
Thick or Hardened Zona: Increase bevel length slightly (5–10 µm) and raise injection pressure by 1–2 hPa. Pre-treatment: Brief acid-Tyrode or calcium-free incubation can soften the zona, reducing required force. Monitoring: Watch for “give” as the tip traverses the zona—avoid over-penetration beyond that point.
Cytoplasmic Appearance: Even granularity, absence of large vacuoles Zona Quality: Uniform thickness, no debris or dark cortical granules Polar Body Integrity: Single, clear first polar body without fragmentation
Cytoplasmic Darkening: Rapid darkening or granulation within 30 minutes Membrane Blebbing: Small blebs or protrusions on the oolemma Pronuclear Failure: Absence of two pronuclei at the 18–20 hour check
Signs: Excessive cytoplasmic leakage, large, persistent media droplets at the tip, or oocyte collapse. Prevention: Calibrate injection pressure and duration (e.g., 1–2 s pulses). Use the minimum volume needed to release the sperm. Monitor each injection under real‐time imaging.
Gradual Pressure Ramp: Program microinjector to ramp up suction/injection over 1–2 seconds Pre‐Drill: Create a small opening with a laser or acidic Tyrode before pipette entry Dampened Tip: Fire‐polish to produce a slightly rounded bevel that cushions entry
Generally no—post-injection aspiration risks: Disrupting the spindle apparatus. Introducing additional mechanical stress. Only consider a brief, gentle aspiration if confirming penetration depth or retrieving a biopsy sample.
Visible Fissures: Hairline cracks radiating from the pipette entry site Zona Chips: Glass shards or irregular zona fragments floating in the drop Increased Resistance: Sudden release of pressure when advancing through the zona
Successful: A brief “give” or release in pipette resistance. Slight cytoplasmic swelling around the pipette tip. Failed: Persistent high resistance or sudden loss of resistance without swelling. Cytoplasmic leakage or oolemma collapse around the tip.
Monash Biotech's Injection Micropipettes are available in three inner diameter sizes: 5µm, 7µm and 8µm.
Successful: A momentary drop in resistance (“pop”) as the membrane yields. Slight cytoplasmic swelling around the tip. Failed: Persistent high resistance with no give. Sudden loss of resistance without swelling (membrane bounce or “rebound”).
Two Pronuclei (2PN): Clear, centrally located pronuclei at ~16–20 h post‐inject. Second Polar Body Extrusion: Confirms completion of meiosis II. Pronuclear Alignment: Even separation from oolemma and opposite each other.
Oocyte Activation Failure: Insufficient calcium oscillations post‐injection. Sperm‐Related Issues: DNA fragmentation or chromatin decondensation defects. Spindle/Chromosome Damage: Mechanical trauma during penetration. Cytoplasmic Deficiencies: Poor ooplasmic maturation or metabolic insufficiency.
Common Causes : Sudden pressure changes during sperm injection Excessive force while penetrating the zona pellucida Manufacturing defects or micro-fractures from handling Avoidance Tips : Use micro-pipettes designed specifically for ICSI with reinforced tapering Control injection pressure using microinjector settings carefully Minimize contact between the micro-pipettes and the ICSI dish base Handle micro-pipettes with delicate forceps—never bare hands
Over‐Suction: Excessive negative pressure draws oolemma too tightly. Zona Breach: Damage allowing oil or medium to infiltrate. Osmotic Shifts: Rapid changes in surrounding media tonicity.
The micropipettes with a spike are available in 30° and 35° angled configurations with a bevel length of 11 μm and an inner diameter (I.D.) of 05 μm
Inner Diameter: ~5 µm at the tip to snugly hold a single sperm head. Outer Diameter: ~7–8 µm to penetrate the zona with minimal force. Taper Length: 90–120 µm for optimal rigidity and visibility under the microscope.
Inner Diameter: A 5 µm ID closely fits the sperm head, reducing cytoplasmic leakage and drag. Bevel Length: Short bevels focus force; long bevels (>15 µm) can slide through the zona without clean cuts. Wall Thickness: Thicker walls resist bending but may reduce visibility; aim for ~1 µm wall thickness at the tip.
After retrieval, oocytes are typically incubated for 2–4 hours to allow cytoplasmic maturation before ICSI. Performing ICSI within 3–5 hours post-pickup balances maximum fertilization potential with minimal oocyte aging.
Gentle Suction Modulation: Slightly reduce then increase holding pressure in sequence Oil-Overlay Method: Use fluid currents under oil to nudge the oocyte into position Microneedle Assistance: Lightly touch with a separate blunt pipette (not the injection pipette)
The taper length of our Injection Micropipettes is 600 micrometers.
Vibration-Damped Stage: Use anti-vibration tables or dampening pads under the microscope. Ergonomic Setup: Position joysticks, monitor, and pipettes to avoid operator fatigue and tremor. Batch Handling: Process small groups (5–10 oocytes) per session to limit total exposure time and keep procedures swift.
Extend Incubation: Give extra 30–60 minutes to allow cytoplasmic clearing Media Change: Transfer to fresh, low‐density medium to remove debris Evaluate Viability: Consider excluding severely granular oocytes that may have impaired spindle function
Bevel Sharpness: Maintain a 10–15° bevel for a defined cutting edge. Pre-drills or Piezo: In cases of tough membranes, use a brief laser pulse or piezo pulse to weaken the oolemma first. Depth Control: Retract the tip 1–2 µm after crossing the zona to position just outside the oolemma, then advance into the cytoplasm.
Increased Oocyte Aging: Extended exposure to outside-incubator conditions elevates reactive oxygen species and spindle disorganization. Recommended Workflow: Complete each ICSI batch within 15–20 minutes to preserve oocyte competence.
Too Shallow: Sperm may lodge in the zona or perivitelline space, failing to trigger activation. Too Deep: Risks spindle contact or cytoplasmic leakage, compromising embryo development. Optimal: Penetrate just past the oolemma—typically 2–3 µm into the ooplasm.
Stubborn Zona: Thick or hardened zona pellucida (e.g., post‐vitrification). Fragile Oocytes: Poor membrane elasticity in older or dysmorphic oocytes. Recurrent Injection Failures: Standard ICSI repeatedly fails activation.
High Fragmentation Load: Early cytoplasmic damage leads to cell death. Genetic Abnormalities: Chromosomal mismatches trigger lysis. Culture Conditions: Suboptimal media or temperature fluctuations causing degeneration.
Mechanical Trauma: Excessive shear disrupting cytoskeletal integrity. Activation Irregularities: Aberrant calcium signaling leads to asynchronous divisions. Intrinsic Defects: Ooplasmic or mitochondrial dysfunction affecting cell cycle dynamics.
Membrane Breach: Minor rips in the oolemma causing cytoplasmic leakage Osmotic Imbalance: Exposure to hypotonic or hypertonic medium during transfer Temperature Shock: Rapid cooling or warming during movement between drops
Cytoplasmic Injury: Localized trauma from tip movement. ER/Mitochondrial Clumping: Age or cryodamage can manifest as vacuoles. Metabolic Stress: Oxidative damage during handling.
Click on Your Topic to get answers
Visit our full FAQ Page for in-depth answers or reach out to our Customer Support team.